2012 Harley-Davidson Dyna

Displacement: 1687.97 ccm (103.00 cubic inches)
Engine type: V2, four-stroke
Engine details: Air-cooled, Twin Cam 103™
Torque: 135.60 Nm (13.8 kgf-m or 100.0 ft.lbs) @ 3500 RPM
Compression: 9.6:1
Bore x stroke: 98.4 x 111.3 mm (3.9 x 4.4 inches)
Fuel system: Injection. Electronic Sequential Port Fuel Injection (ESPFI)
Lubrication system: Pressurized, dry-sump
Cooling system: Air
Gearbox: 6-speed
Transmission type,
final drive: Belt
Clutch: Multi-plate with diaphragm spring in oil bath
Driveline: Primary Drive Chain, 34/46 ratio. Final Drive Belt, 32/66 ratio.
Fuel consumption: 5.60 litres/100 km (17.9 km/l or 42.00 mpg)
Greenhouse gases: 129.9 CO2 g/km. (CO2 - Carbon dioxide emission)
Exhaust system: Chrome, “Tommy Gun” 2-1-2 collector exhaust with dual mufflers
Chassis, suspension, brakes and wheels
Frame type: Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; forged fender supports; MIG welded
Rake (fork angle): 29.0°
Trail: 125 mm (4.9 inches)
Front suspension: 49 mm with polished aluminum fork triple clamp and dual-rate springs
Front wheel travel: 127 mm (5.0 inches)
Rear suspension: Coil-over shock. Mild steel, rectangular tube sections, stamped junctions; MIG welded swingarm.
Rear wheel travel: 54 mm (2.1 inches)
Front tyre: 130/90-B16
Rear tyre: 180/70-B16
Front brakes: Single disc. 4-piston fixed. Optional ABS.
Front brakes diameter: 300 mm (11.8 inches)
Rear brakes: Single disc. 2-piston torque-free floating. Optional ABS.
Rear brakes diameter: 292 mm (11.5 inches)
Wheels: Machined, Aluminum Slotted Disc
Seat: One-piece, two-up Dyna classic seat
Physical measures and capacities
Dry weight: 305.3 kg (673.0 pounds)
Weight incl. oil, gas, etc: 320.2 kg (706.0 pounds)
Seat height: 663 mm (26.1 inches) If adjustable, lowest setting.
Overall length: 2,329 mm (91.7 inches)
Ground clearance: 125 mm (4.9 inches)
Wheelbase: 1,618 mm (63.7 inches)
Fuel capacity: 18.93 litres (5.00 gallons)
Oil capacity: 2.80 litres (0.18 quarts)