Tap Here to Email Seller Swipe left to dismiss
 

2016 Husqvarna FC250

Off-Road Motorcycle for sale by Mungenast Motorsports in St. Louis, Missouri 63123

Mungenast Motorsports

Advertisement
Advertisement
Motorcycle Overview

Motorcycle Overview

New 2016 Husqvarna FC250 $6,999

St. Louis, MO Blue/White · 4-stroke · 1 miles
Outstanding Handling
New Frame: With years of experience in designing the most advanced steel frames in offroad, the engineers in Research and Development have designed a completely new chromium molibdenum steel frame that redefines every structural aspect in order to improve handling, ergonomics and packaging. The torsional rigidity and longitudinal stiffness have been completely rethought. The 6mm wider and 2mm lower steel tubes offer 20% more torsional rigidity and 30% less longitudinal stiffness compared to the previous generation frame design. These characteristics, matched to the new engine stays, improve handling precision while at the same time increasing bump-absorption and feeling.
New CNC Machined Triple Clamps: The black-anodised CNC machined triple clamps feature a new top clamp that integrates a rubber damping system that reduces vibrations, therefore increasing comfort. The triple clamps have been meticulously designed to evenly distribute the clamping force on the fork leg, maximizing contact area for optimal sensitivity and minimum friction. Handlebar position adjustability has been maintained for MY16.
New Suspension: WP’s 4CS fork has a revised setup to match the new chassis characteristics of the MY16 generation motocross. As with all 4CS forks by WP, the clicker settings can be easily and quickly adjusted via the dials on the top of the fork tubes. The red dial on the right alters rebound damping, while the white dial on the left is for compression damping. A new, shorter and lighter shock by WP features a larger gas chamber designed to maintain consistent performance during use. New internal components, such as the piston and shock shaft increase setup options. A new clevis design contributes to shortening the overall length by 12 mm, while the stroke is reduced by 3 mm. The shock is completely adjustable for high and low speed compression damping as well as rebound. The rear link has been completely redesigned to match the new rear shock. 148.2 mm pull rods replace the previous link’s 145 mm items and, combined with the redesigned bell crank, maintains a similar progressive rate as MY15. Rear wheel travel is now 300 mm and, thanks to the uprated rear suspension behaviour, softer springs can be used.
New Carbon Fibre Subframe: The use of carbon fibre strips away weight, improving weight distribution and bringing weight closer to the centre of gravity for precise handling. The composition of the material is now 30% carbon fibre and the overall 3-piece construction is 1 kg lighter than the previous subframe, for an overall weight of 1.4 kg. It is also more compact as well as being shorter, for greatly improved ergonomics.
Benchmark Engine Performance
New Crankcases: The new FC 250 features a completely redesigned engine with mass-centralisation and weight reduction as the main goals. All the major components have been repositioned; the crankshaft has been raised by 6 mm while the clutch shaft is 11.1 mm further back and 26.9 mm higher up. These modifications required a complete redesign of the crankcases which are now significantly more compact and lighter.
New Engine: The crankshaft has been repositioned and is now 6 mm higher than on the previous engine and, together with a 6 mm shorter con-rod, repositioned internal components and redesigned crankcases, results in a shortened engine by 20 mm, bringing the mass closer to the centre of gravity of the bike. The 250 cc engine is not only smaller, but also 1.1 kg lighter for an overall weight of just 26.1 kg. Overall power output is now rated at 46 hp at the output shaft.
New DOHC Cylinder Head: The new DOHC cylinder head has an optimised combustion chamber, new camshafts with new timing, 30% harder DLC coating on the finger followers to reduce friction and new valve springs and retainers. The modifications are aimed at boosting low- and mid-range torque as well as peak power.

2016 Husqvarna FC250 Specifications

  • VIN

    139897
  • Motorcycle ID

    200403680
  • Stock Number

    H1517
  • Category

    Motorcycle
  • Condition

    New
  • Trim Body Style

  • Bodystyle

    Off-Road
  • Doors

    N/A
  • Suspension

  • Suspension

    N/A
  • Engine

  • Engine

    4-stroke
  • Drivetrain

    N/A
  • Transmission

  • Transmission

    5-speed
  • Exterior

  • Exterior Color

    Blue/White
  • Custom Exterior Color

    N/A
  • Interior

  • Other

  • Drivetrain

Motorcycle Buyer and Seller Resources

Advertisement
Compare ({{vehicles.length}}/3)