2018 Husqvarna FE501

DEALER NOTES:

This bike was a one owner, garagekept bike that spent most of its life in the southwest and wasn't exposed tothe mud pits of the soggy east coast. It was purchased new in San Diego and theowner had it tastefully modified with just the essentials for doing the type ofback road riding he was doing out west at the time. It has had regular serviceat the dealer and we have the printout of its short life of service history.The bike has only done 3600 miles so it has had all the regular oil changes andvalve checks done on time with some of the hourly oil changes being done athome by the owner. This is a very clean enduro and has no signs of any harddrops or trail damage and the wheels, frame, and engine cases still look likenew. The tail panels were replaced just due to boot wear and from where he hadsoft luggage that had rubbed the coarse desert dust into the factory plastic sothey were retired in place of some nice shiny new Acerbis which better matchthe condition of everything else on the bike. All the other plastic is factoryoriginal however and shows how well taken care of this bike truly was. This isone of the best handling enduros of any size, weight, and price range and isjust at home blasting across wide open expanses of desert dunes as it iscarving down your favorite back roads or even running your local enduro eventsin the backwoods. These bikes will do it all - don't miss out on this lowmileage one owner example of a very clean and very tastefully modified dualsport.

NUMBER OF PREVIOUSOWNERS: VERIFIED ONE OWNER!

CURRENT MILEAGE:  3630 (May very slightly due to us test riding thebikes, generally less than 200 miles)

TITLE STATUS: Clean (No Brands, No liens, Actual Mileage)

ORIGINAL OWNERSHIPITEMS INCLUDED: Spare key, tool kit, originalHusqvarna Owners Binder, stock parts

FACTORY FEATURES:

ENGINE

Combining low weightwith a compact design, the FE 450 and FE 501

engines feature thelatest technology available offering unequalled performance,

ride-ability andreliability. Additionally, both engines are suited

specifically for endurotype riding with a standard electric start, 6 speed

wide ratio gearbox andan array of electronic rider aids.

Updated engines –lightweight, compact & powerful

Class leadingelectronics – traction control, map select, Keihin EFI

MAP SWITCH &TRACTION CONTROL

The Husqvarna Enduro4-stroke model range features a standard

mounted handlebar mapswitch and an advanced traction control feature.

The system is able toanalyse the throttle input from the rider and the rate

at which RPM increasesin the engine. If the RPM increases too fast, the

ECU will register a lossof grip and reduce the amount of power to the

rear wheel to ensuremaximum traction in all conditions.

Traction control systemfor maximum traction and control

Standard map switch foradjustable engine characteristics

Engine

Design 1-cylinder,4-stroke engine

Displacement 510.9 cm³

Starter Electric starter

Transmission 6-speed

Primary drive 31:76

Clutch Wet, DDSmulti-disc clutch, Magura hydraulics

EMS Keihin EMS

Chassis

Frame design 25CrMo4steel central-tube frame

Front suspension WP-USDXplor 48 with preload adjuster

Rear suspension WP shockabsorber with linkage

Suspension travel(front) 11.81 inch

Front brake Maguratwo-piston floating calliper, brake disc

Rear brake Magurasingle-piston floating calliper, brake disc

Rear brake disc diameter220 mm

Chain X-Ring 5/8 x 1/4?

Steering head angle 63.5°

Seat height 38.19 inch

Weight without fuel240.96 lb.

Suspension travel (rear)12.99 inch

Tank capacity (approx.)2.25 US galCYLINDER HEAD

The compact SOHCcylinder head on both engines offers maximum

performance at theminimum possible weight. The camshaft actuates

four lightweight valves(titanium intake Ø=40 mm 32,6 g, steel exhaust

Ø=33 mm 42,6 g) througha robust rocker arm system.

SOHC – compact enginedesign

CYLINDER AND PISTON

The lightweightaluminium cylinder features a 95 mm bore housing a

lightweight Konigbridge-box-type piston. This combination produces

very little oscillatingmass significantly reducing vibration and increasing

rider comfort. Thecompression ratio is 11.8:1 for both models.

Lightweight aluminiumcylinder – 95 mm bore

Lightweight forgedbridged-box-type piston – high performance,

reduced oscillatingmasses

CRANKSHAFT

A plain big end bearingcomprising of two force-fitted bearing shells

ensure maximumreliability and durability, guaranteeing long service

intervals of 135 hours.

Plain big end bearing& force-fitted bearing shells –

increased durability& service intervals

COUNTER BALANCER SHAFT

In order to counteractthe rotational force of the crankshaft and reduce vibration, both

engines usemultifunctional counter balancer shafts that also drive the water pumps.

Multifunctional counterbalancer shaft – reduced vibrations, compact design

CRANKCASES

The crankcases aredesigned to house the shaft arrangements and internals of the

engine in the bestpossible position, centralising masses for a lightweight handling feel.

High-pressure die castproduction processes result in a thin but reliable wall thickness

and keep weight to aminimum.

Design –mass-centralisation, lightweight handling

High pressure die castproduction process – thin walls for reduced

weight, whilemaintaining strength

GEARBOX

The lightweight 6-speedgearboxes ensure smooth and precise shifting thanks to a low

friction coating on theshifting fork. The gear lever features a design that prevents dirt

build-up and keeps thelever tip in its original position even in the toughest conditions

while a gear sensorallows for specific engine maps in each gear.

6-speed gearbox –lightweight

Fork coating – smoothand precise shifting

Gear sensor – specificengine maps for each gear

DDS CLUTCH

Both engines feature DDS(Dampened Diaphragm Steel) clutches. The exclusive

characteristics of thissystem include a single diaphragm steel pressure plate instead

of traditional coilsprings making the clutch pull very light while the integrated damping

system guaranteesoptimal traction and durability. The clutch baskets are single-piece

CNC machined steelcomponents that allow the use of thin steel liners and contribute

to the compact design ofthe engines. The Magura hydraulic systems ensure perfect

modulation in allconditions.

DDS clutch – compactwith better modulation and maximum durability

Magura hydraulic system– perfect clutch modulation

UPGRAGES:

• Lexx Slip on Exhaust $400
• Zeta integrated signal handguards $175
• Seat concepts seat $280
• Husqvarna Factory steering damper $450
• LED headlight $50

Total Upgrade Parts Cost(Without labor or shipping) $1355!!!

RECENT SERVICES:

• Engine Oil and filter (Just performed here at our dealership at time of trade in)
• Fuel filters (Just performed here at our dealership at time of trade in)
• Valve clearance check (Just performed here at our dealership at time of trade in)
• New tires installed beginning of the season and have less than 10 hours on them

COSMETICIMPERFECTIONS: Normal wear and tear andweathering associated with year and mileage - no accident or crash damage

MECHANICALIMPERFECTIONS: NONE - FLAWLESS!!!

PRE-OWNEDCERTIFICATION LEVEL: GOLDLEVEL CERTIFIED!

WARRANTY TYPE: 30 Day / 1000 mile FULL wheel to wheel no hassle warranty

PLEASE FEEL FREE TO CONTACT US FOR A COPY OF OUR INDUSTRY LEADINGPRE-OWNED VEHICLE QUALITY ASSURANCE INSPECTION CHECKLIST THAT WAS COMPLETED FORTHIS BIKE!

Visit Black Market Bikez LLC. online at blackmarketbikez.com to see morepictures of this vehicle or call us at 717-515-0064 today to schedule your testdrive.